Интегрированная машина для сельскохозяйственной корм

Acme интегрированная машина для дробления и микширования: спасение 60% труда и достигает 92% feed uniformity.

Интегрированная машина подачи дробилки advantages: Traditional feed processing requires two steps: “crushing + mixing”: first use a crusher to crush corn and soybean meal, and then mix them manually or with a mixer, which is time-consuming, labor-intensive, and prone to cross-contamination. The core value of the Acme feed crusher lies in “integration” – it combines the crushing chamber and the mixing chamber into one. After the material enters from the feed inlet.

Feed crusher integrated machine first crushed by a hammer at high speed (speed 2800 rpm), and then evenly mixed with the premix (such as vitamins and minerals) through the built-in spiral propeller, and finally the finished feed is directly output from the discharge port. Actual measured data from a certain farm shows that the processing of 1 ton of feed, which originally required 2 people to operate and took 4 hours, can now be completed by 1 person in 1 hour, with labor costs reduced by 60%, and feed uniformity increased from 75% к 92% (animals eat more evenly and grow faster).

Feed crushing machine vs ordinary crusher

Ordinary pulverizers can only pulverize raw materials alone, and then they need to be mixed manually or with a mixer, which is time-consuming and labor-intensive, and the exposed powder is prone to moisture absorption and cross-contamination; Acme feed crusher integrated machine and mixing functions, and it only takes 15 seconds from feeding to discharging, eliminating the need for step-by-step operations.

According to actual measurements at a farm, it used to take 2 people 4 hours to process 1 ton of feed, but now it can be completed by 1 person in 1 hour, reducing labor costs by 60%, and feed uniformity from 75% к 92%. The fully enclosed design can avoid powder contamination, and both efficiency and hygiene are improved.

Working principle of feed crusher integrated machine

The material falls into the crushing chamber from the top feed port, and the high-speed rotating hammers crush the material. The fine powder passes through the screen (adjustable aperture) and falls into the mixing chamber; it tumbles fully under the push of the stirring shaft and is finally discharged from the bottom discharge port. The whole process is short, and the powder temperature is controlled below 40°C (to avoid high temperature damage to nutrition).

What other scenarios can the Acme feed crusher integrated machine for?

Family farms: equipped with a 0.5 ton/hour small machine, farmers with 20 cows can process their own feed, saving 30% of the cost compared to buying finished feed;
Special breeding: customized “low temperature crushing” mode for pet food factories (reducing the speed to 2000 rpm) to retain the protein activity in fish and chicken and improve the palatability of pet food.
Ruminant farms: For livestock such as cattle and sheep that require roughage, blunt-toothed hammers can be replaced (to reduce fiber breakage), and roughage such as corn stalks and alfalfa can be crushed (particle size 5-8mm), and licking brick powder and mineral premixes can be added simultaneously to meet the dual needs of ruminants for fiber and trace elements.