Process & Quality
Grain Cleaning Equipment
In wheat milling, the FDMW horizontal grain scourer loosens dirt attached to kernel surfaces before grinding. Size it for the wheat flow and available aspiration; compare inlet grain, cleaned grain and rejects to check that cleaning is not costing you sound kernels. See how to sample wheat and measure breakage.
The ACME FDMW horizontal wheat scourer uses mechanical rubbing and impact to loosen material adhering to wheat kernels before flour milling. It complements screening, destoning and aspiration rather than replacing the complete cleaning system.
Compare the rotor and screen concept with the workshop machine. Surface treatment, aspiration and the condition of the discharged wheat must be assessed together.
Process reference showing grain feeding and mechanical surface treatment. It is not an instrumented cleaning test or confirmation of every internal part supplied.
The sequence illustrates grain entering a horizontal working chamber and moving past the rotor and screen. Review loosened material removal separately. Any upstream magnetic separation shown belongs to the cleaning-line arrangement, not an automatic inclusion in the scourer supply.
Actual equipment footage for comparing the enclosure, drive and access arrangement. The recording does not establish a measured capacity or kernel-damage rate.
The workshop views show the assembled horizontal machine and its external arrangement. Use these views to discuss feed, discharge, guarding and maintenance access. Agree representative inlet, product and reject sampling for any performance acceptance.
Use the listed wheat capacities as a starting point. Confirm the model against your incoming material, peak feed rate and cleaning duty.
| Parameter | FDMW-40x100 | FDMW-40x120 | FDMW-40x150 |
|---|---|---|---|
| Wheat capacity | 4-6 t/h | 6-8 t/h | 8-12 t/h |
| Main shaft speed | 1,050-1,225 r/min | 1,050-1,225 r/min | 1,050-1,225 r/min |
| Motor power | 7.5 kW | 11 kW | 15 kW |
| Listed airflow requirement | 2,200 m³/h | 2,800 m³/h | 3,400 m³/h |
| Machine weight | 1,100 kg | 1,350 kg | 1,600 kg |
| Overall dimensions (L x W x H) | 2120 x 1020 x 1480 mm | 2330 x 1050 x 1500 mm | 2600 x 1080 x 1540 mm |
Before ordering: Confirm the current technical datasheet, capacity conditions, electrical specification and supply scope in your quotation. Dimensions do not include every connection or maintenance clearance. A listed shaft-speed range does not mean a variable-frequency drive is included.
Surface treatment and removal of the released material are connected tasks. Check the machine and its aspiration arrangement together.
Grain enters the working chamber at a controlled rate. A stable feed helps maintain consistent contact with the working surfaces.
The rotor moves kernels against the screen jacket and other kernels. Mechanical rubbing and impact help release surface dirt and loose outer material.
The screen, discharge and aspiration arrangement provide a removal path for loosened material. Connections must match the selected machine and cleaning line.
Compare representative inlet, outlet and reject samples during commissioning. Assess surface cleanliness alongside broken kernels and useful grain lost with rejects.
Surface cleaning may be used in different cleaning sections. These illustrations show process concepts, not a compulsory three-stage arrangement or proof that every mill needs two scourers.

Review the remaining surface contamination after preliminary separation. Match the scouring duty to the wheat condition and the downstream conditioning process.

If the flow sheet calls for further surface treatment, reassess moisture, feed condition and operating settings. A second machine should be justified by the actual process.

Surface condition is one part of flour-quality control. Wheat characteristics, extraction and the complete milling process also affect the final flour specification.
Start with your material, required throughput and installation country. You do not need to know the final model or fan specification before making an inquiry.
A machine-only quotation and a connected cleaning-stage package cover different requirements. Have the following items identified in the agreed supply scope.
This is a scope-review checklist, not a statement that every item is included. Availability and responsibilities should be confirmed in the quotation.
It treats the outside of wheat kernels through mechanical rubbing and impact. Its purpose is surface cleaning within a milling line; it does not replace screening, destoning or a complete grain-cleaning system.
Start with normal and peak grain flow, wheat condition and the intended cleaning duty. Then review the power, aspiration and space requirements. Do not select solely from a nominal capacity or apply wheat ratings to another crop without confirmation.
Confirm this in the supply scope. The scourer, fan, aspiration equipment, ducting and dust collection should be identified separately where applicable. A listed airflow requirement is not confirmation that a fan is included.
Suitability depends on the available space, process position, feed and discharge connections, electrical supply and air system. Send your flow sheet, connection details and installation constraints for a configuration review.
Not every mill needs two machines. Surface treatment can be specified in different cleaning sections, but the number of stages and settings depend on the wheat, moisture, process layout and required result.
Unsuitable mechanical intensity or operating conditions can damage kernels. Check cleaning results, broken kernels and rejects with representative material. A scourer alone cannot guarantee flour colour, ash content or extraction; those depend on the complete process.
Request information for the proposed rotor, screen jacket, bearings and access arrangements. Review the available parts list and maintenance instructions for the actual configuration rather than relying on a general process illustration.
The selected model, construction, electrical requirements, aspiration scope, controls, spares and delivery destination affect the quotation. Send your material, required capacity and country for a configuration-specific price.
Send your material, normal and peak capacity, and installation country. Include FDMW wheat scourer in your message and note any aspiration or layout questions.
