Process & Quality
Grain Cleaning Equipment
Configuration is selected according to your raw material, target product, required capacity and site conditions.
Coarse impurity removal before storage or processing
Wheat or another agreed grain arrives with oversized field and handling debris.
Usable grain passes through the selected openings while larger material remains inside the drum.
Pre-cleaned grain continues downstream and oversized impurities discharge from the drum end.
The exploded view identifies the screening drum and enclosure. Compare the animation with the workshop machine to review how grain and oversized impurities leave through their respective paths.
Concept illustration of size-based pre-cleaning, not fine flour classification or a measured impurity-removal trial.
Grain enters the cylindrical screening section. Material passing through the selected screen follows the accepted-grain route, while retained oversized material follows the reject route. The selected aperture and actual crop determine what is separated.
Actual equipment footage for reviewing the drum, enclosure and operating arrangement. The video does not provide weighed input, reject loss or timed capacity figures.
The machine views show the assembled drum pre-cleaner and its external access points. Review inlet and outlet connections and service space for your line. Use a representative grain test to check useful grain in the rejects rather than judging performance from appearance alone.
Working principle
This is a first-stage grain cleaner. Its job is to take out coarse material before finer cleaning, milling, conveying or storage.
The upstream conveyor or elevator supplies a controlled flow to the inlet.
The slowly rotating drum moves the grain across the perforated screening surface.
Material smaller than the selected aperture falls through and continues to the next process.
Straw, stalks, cobs and other pieces too large for the openings travel to a separate outlet.
Project configuration
Capacity alone is not enough. The same drum opening will not suit every crop, impurity profile or line arrangement.
Typical positions in the line

Remove bulky debris before it reaches elevators, conveyors and finer cleaning machines.

Stabilize the incoming stream before downstream cleaning, grinding or milling.

Separate oversize material before grain enters the agreed storage and conveying system.
Confirmed technical specifications
The capacity values below are based on wheat. Final selection must account for the actual crop, impurity load and feeding conditions.
| Parameter | TSCY-100 | TSCY-125 | TSCY-150 |
|---|---|---|---|
| Wheat capacity | 40-60 t/h | 60-100 t/h | 100-160 t/h |
| Drum speed | 16-20 r/min | 16-20 r/min | 14-18 r/min |
| Motor power | 1.1 kW | 2.2 kW | 3.0 kW |
| Matched aspiration airflow | 1,000 m³/h | 1,400 m³/h | 2,000 m³/h |
| Machine weight | 910 kg | 1,280 kg | 1,700 kg |
| Overall dimensions (L x W x H) | 2190 x 1200 x 1820 mm | 2360 x 1400 x 2015 mm | 3800 x 1900 x 2200 mm |
| Screen aperture | φ16-φ22 mm, replaceable | φ16-φ22 mm, replaceable | φ16-φ22 mm, replaceable |
Selection note: Wheat capacity is the supplied reference basis. Different crops, moisture, impurity levels and feed consistency can change actual throughput. Confirm the selected aperture and aspiration arrangement before ordering.
Model selection
Select enough capacity for stable operation without treating the largest catalog number as the automatic answer.
The screen must pass the accepted crop while retaining the oversized material that causes the problem.
Verify dust extraction, inlet and outlet positions, service access, foundations and electrical supply.

Before quotation
Frequently asked questions
It is a first-stage grain cleaning machine that uses a rotating perforated drum to separate oversized debris from the accepted grain before storage or further processing.
Its primary job is to remove material larger than the selected screen opening, such as straw, stalks, cobs, rope, leaves and large clumps. The actual result depends on the crop, impurity profile and aperture.
No. It is designed for preliminary coarse cleaning. Fine impurities, dust, stones or density-based defects may require aspiration, a vibrating cleaner, a destoner or another downstream stage.
The supplied specification lists replaceable φ16-φ22 mm apertures. ACME should review the crop size and impurities before confirming a replacement screen.
Throughput changes with crop density, moisture, impurity load and feeding consistency. A named reference crop makes the model comparison clearer and avoids treating one number as universal.
Send the raw material, average and peak capacity, impurity photos, preferred screen opening if known, installation country, voltage, available airflow, site dimensions and connected equipment.
ACME can review the suitable TSCY model, replaceable screen, aspiration demand and line interfaces for your project.
