Aplicación de la máquina de embalaje

Low-cost semi-automatic packaging is preferred

Máquina de envases：Traditional small and medium-sized processing plants use manual grasping and platform scale weighing for packaging, with errors often exceeding 1% (Por ejemplo, a bag in a feed factory is weighed 250g less, resulting in a high customer complaint rate). Además, only 20 bags can be packed in an hour, requiring two people to work in shifts, and labor costs account for a large proportion.

ACME computer quantitative packaging machine uses a computer controller + variable frequency three-speed feeding, with a metering accuracy of ±0.3% (3 times more accurate than manual), can pack 40-50 bags per hour, and only requires one person to assist in bagging. The equipment price is only 1/5 of the fully automatic equipment and maintenance is simple (no complex robotic arms).

It not only solves the pain points of inaccurate manual weighing and low efficiency, but also avoids the high cost and idle risk of fully automatic models. It is a practical choice for small factories to improve measurement standardization and production capacity.

Packaging Machine VS Fully Automatic Packaging Machine

Compared to fully automatic packaging machines costing over 100,000 yuan, the BZJ-25KG’s advantages lie in its adaptability to various scenarios. By eliminating modules like automatic bagging and visual recognition, the price of the BZJ-25KG is only one-fifth that of a fully automatic machine. With no complex robotic arms, there are fewer potential problems (common blockages can be resolved with an air gun blowing out the feed port).

ACME packaging machine working principle

After the machine starts, a computer controller controls the main screw to discharge materials at three speeds: fast, slow, and even, based on the set target weight of 25 kilos. Initially, it rotates at high speed (1500 rpm) for rapid filling. As the target weight is approached, it switches to medium speed (1000 rpm) to prevent overflow. Finalmente, it adjusts to low speed (500 rpm) for precise accuracy.

The material is dropped directly into woven bags on the conveyor belt via the bucketless screw, without intermediate storage (to prevent residue). The conveyor speed is synchronized with the material discharge speed to ensure consistent weight for each bag. The bag sewing machines are independently controlled, allowing workers to adjust the stitch density at any time to accommodate different bag materials. Once sealed, simply push the bag and go. No extensive training is required.

Where else can the ACME packaging machine be used?

Building materials factories: Packaging cement additives (such as water reducers), with an accuracy of ±0.3% to ensure a stable mix ratio and prevent inaccurate metering from affecting concrete strength.

Chemical plants: Packaging fertilizer granules (such as urea). The anti-clogging design accommodates wet raw materials (moisture content ≤ 12%) and is more stable than vibrating feeders.

Food plants: Packaging coarse grains (such as Job’s tears and oats). The blunt-tooth screw reduces particle breakage (breakage rate <1%), meeting the needs of upgraded bulk grain packaging.